Vee

Vee

Technical Ventilated Façades
Press-in-place systems

We have developed the Vee series with three sizes of slats (45 – 90 – 109 mm.) These project perpendicularly to the plane of the facade to generate shade and avoid direct solar impact on the glass, improving its thermal efficiency. The system allows the installation of vertical supports up to a maximum of 2.00 meters still guaranteeing its wind resistance class 5. This condition allows its use as an alternative protection element in hurricane zones.

Vee series gives us the possibility to customize the façade by generating different volumes and degrees of opening between slats that allow us to adjust the lighting to the demand of the project. The slat sizes can be installed individually or combined while sharing the same die cut support.

The different sizes of its slats and separation options favor its decorative application in interiors and the design of pergolas as well.

FEATURES

SOLAR CONTROL

Solar control slats are designed to limit the direct incidence of natural light. They reduce the temperature inside the installed areas and favor transparency, allowing the user to enjoy a high degree of vision.

PRESS-IN-PLACE SYSTEM

The installation of press-in-place systems offers several benefits: 

  • The benefits inherent to the ventilated façade 
  • A variety of models 
  • One dimensional and multidimensional design options 
  • Multiple combinations to create dynamic sights 
  • Ample response to technical demands 
  • Light weight, high wind load resistance > 249 km (155 miles)/hour 
  • Avoids oxidation risks 
  • Facilitates aligning the slats 
  • Reduces installation times 
  • Offers a wide price range 

TECHNICAL INFORMATION AND DOWNLOADS

Download the technical documents related to this product:

Jay

Jay

Technical Ventilated Façades
Press-in-place systems

When the demand for privacy takes precedence over the degree of natural lighting in glazed areas, while maintaining the conditions that allow direct solar incidence to be controlled, a different design is required such as the Jay model. This proposal reduces the frontal view towards the interior of the area up to 35% without seriously affecting the level of lighting that is maintained in terms of 60% of the installed surface, all this, thanks to the projected design of its slats that transfer to the facade a high aspect of solidity even at higher altitudes.

The design of this model also incorporates qualities that limit the entry of rainwater and favor the required air flow in air conditioning equipment installations.

FEATURES

SOLAR CONTROL

Solar control slats are designed to limit the direct incidence of natural light. They reduce the temperature inside the installed areas and favor transparency, allowing the user to enjoy a high degree of vision.

PRESS-IN-PLACE SYSTEM

The installation of press-in-place systems offers several benefits: 

  • The benefits inherent to the ventilated façade 
  • A variety of models 
  • One dimensional and multidimensional design options 
  • Multiple combinations to create dynamic sights 
  • Ample response to technical demands 
  • Light weight, high wind load resistance > 249 km (155 miles)/hour 
  • Avoids oxidation risks 
  • Facilitates aligning the slats 
  • Reduces installation times 
  • Offers a wide price range 

TECHNICAL INFORMATION AND DOWNLOADS

Download the technical documents related to this product:

Sine

Sine

Technical Ventilated Façades
Press-in-place systems

The Sine design favors the entry of air, disables the view to the interior of the machine rooms and blocks the entrance of rain unlike other proposals that offer high percentages of aeration but with a minimal visual coverage. Storm pressure drop values do not make this product recommendable for areas of high demand air conditioners because its design does not facilitate the flow of air (inlet / outlet) making it difficult to vent the equipment.

The Sine model incorporates details in its design that guarantee minimum levels of rainwater entry even in extreme wind pressure conditions. In addition, based on the result of the resistance test that determines a class 5 value for this louver (> 249 km / hour), its specification in hurricane areas is recommended.

FEATURES

COVERING

The coverage slats have as main objective to restrict the views and limit the entry of natural light, rainwater and air into the installed area, in addition to providing aesthetic value to a facade.

PRESS-IN-PLACE SYSTEM

The installation of press-in-place systems offers several benefits: 

  • The benefits inherent to the ventilated façade 
  • A variety of models 
  • One dimensional and multidimensional design options 
  • Multiple combinations to create dynamic sights 
  • Ample response to technical demands 
  • Light weight, high wind load resistance > 249 km (155 miles)/hour 
  • Avoids oxidation risks 
  • Facilitates aligning the slats 
  • Reduces installation times 
  • Offers a wide price range 

TECHNICAL INFORMATION AND DOWNLOADS

Download the technical documents related to this product:

Ell

Ell

Technical Ventilated Façades
Press-in-place systems

The Ell model proposes three separation options between slats depending on the degree of coverage and aeration-free surface required for each project and investment available.

The tests performed on the product in reference to the volume of water infiltration recommend its installation without separation between slats to guarantee maximum efficiency values in terms of pressure drop and coverage of the installed space.

FEATURES

AERATION

The engineering and design of the aeration louvers efficiently meet the flow (inlet / outlet) of ventilation required by the air conditioning equipment that demands minimum levels in the pressure drop values, while guaranteeing the visual coverage of them.

PRESS-IN-PLACE SYSTEM

The installation of press-in-place systems offers several benefits: 

  • The benefits inherent to the ventilated façade 
  • A variety of models 
  • One dimensional and multidimensional design options 
  • Multiple combinations to create dynamic sights 
  • Ample response to technical demands 
  • Light weight, high wind load resistance > 249 km (155 miles)/hour 
  • Avoids oxidation risks 
  • Facilitates aligning the slats 
  • Reduces installation times 
  • Offers a wide price range 

TECHNICAL INFORMATION AND DOWNLOADS

Download the technical documents related to this product:

Cee

Cee

Technical Ventilated Façades
Press-in-place systems

Alternative design to our Zee model that proposes a more innovative and purposeful curved shape in its design, while maintaining the engineering conditions of that model in favor of highlighting the esthetics of the louver in the architectural design of facades.

The supports or louver holders are equally stamped to facilitate the anchoring of the louvers at the level without the need to use fastening screws or oppressors that can be loosened or oxidized due to exposure to environmental agents.

The Cee model offers three options for separating slats depending on the degree of coverage and aeration surface.

FEATURES

COVERING

The coverage slats have as main objective to restrict the views and limit the entry of natural light, rainwater and air into the installed area, in addition to providing aesthetic value to a facade.

PRESS-IN-PLACE SYSTEM

The installation of press-in-place systems offers several benefits: 

  • The benefits inherent to the ventilated façade 
  • A variety of models 
  • One dimensional and multidimensional design options 
  • Multiple combinations to create dynamic sights 
  • Ample response to technical demands 
  • Light weight, high wind load resistance > 249 km (155 miles)/hour 
  • Avoids oxidation risks 
  • Facilitates aligning the slats 
  • Reduces installation times 
  • Offers a wide price range 

TECHNICAL INFORMATION AND DOWNLOADS

Download the technical documents related to this product:

Zee

ZEE

Technical Ventilated Façades
Press-in-place systems

Traditional form Z that proposes a highly aesthetic design engineering that privileges the protagonism of the slat by hiding behind it, the supports or slat holders.

The supports or louver holders are equally stamped to facilitate the anchoring of the louvers at the level without the need to use fastening screws or oppressors that can be loosened or oxidized due to exposure to environmental agents.

The Z slats can be separated from each other by project variables to generate a greater aeration surface or natural light input to the detriment of rainwater ingress and greater exposure to the outside view.

FEATURES

COVERING

The coverage slats have as main objective to restrict the views and limit the entry of natural light, rainwater and air into the installed area, in addition to providing aesthetic value to a facade.

PRESS-IN-PLACE SYSTEM

The installation of press-in-place systems offers several benefits: 

  • The benefits inherent to the ventilated façade 
  • A variety of models 
  • One dimensional and multidimensional design options 
  • Multiple combinations to create dynamic sights 
  • Ample response to technical demands 
  • Light weight, high wind load resistance > 249 km (155 miles)/hour 
  • Avoids oxidation risks 
  • Facilitates aligning the slats 
  • Reduces installation times 
  • Offers a wide price range 

TECHNICAL INFORMATION AND DOWNLOADS

Download the technical documents related to this product: